This is what happens when Epoxy Resin is mixed Incorrectly or with the wrong ratio.

This video shows you what happens when the epoxy is not measured or mixed correctly. The only 2 ways this can happen is if it’s not measured out to the right ratio of Part A to Part B or its not mixed long enough for Part A and Part B to blend. We did a little of both in this video.

[ Leggari Products – Simplifying the Industry ]

Having the best epoxy and the easiest installations makes Leggari the perfect choice no matter your level of expertise! If you want to buy the best from the best you’ve found the right product!

Check out our floor and countertop kits here: www.leggari.com

Subscribe to this YouTube channel to get all the latest installation techniques.

Check out our brochure for more details: https://online.flippingbook.com/view/364043/

If you’re interested in trying out epoxy before purchasing a countertop or floor kit, we have sample kits available. Click here for more info: https://leggari.lpages.co/sample-kit-ad/

—————————————————–

You’re free to use this song in any of your videos, but you must include the following in your video description:
Voyage by LEMMiNO https://soundcloud.com/lemmino
Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0
http://creativecommons.org/licenses/b…

–––

• Optional support (Thanks)

Please provide the following in the description of your upload:
Voyage – LEMMiNO: https://youtu.be/2D9ri6EkI7s

–––

• Main Playlists:

Artists: https://www.youtube.com/channel/UCht8…
Genres: https://www.youtube.com/channel/UCht8…
Moods: https://www.youtube.com/channel/UCht8…

–––

• Follow us:

Facebook https://goo.gl/OnhrRO
Twitter https://goo.gl/WJnMWV
Google + https://goo.gl/eDXHbT

Comments

Keith Boothroyd says:

What is the appropriate mixing time?

Guy McLaren says:

so you mixed it cold and didn’t give it enough time to set, or too cold

WarmTenderTouch says:

This is amazing – I think I’ve found a new hobby! Would like to start out with a very small item though, what would you recommend?

Ermo Tess says:

you didn’t say what mistake he who Mr. pretender did wrong….lol

Samuel Dillon says:

By gallon or more

paul1furby says:

Good vid .

zoom zoom says:

Love you guys videos very good

JDP Creations says:

but why? how? you explain nothing…

Brandon Douglas says:

Wow those prices though

jake lane says:

Not enough hardener

harleybynature says:

NICE demonstration!!

Edit: There’s a lot of hate in the comments section. I cant believe it. Sorry people are dicks

Dirty 30 says:

Can you sand and then polish this type you have used? Saw a couple of nibs that I presume would need to be sanded out.

amorton94 says:

Is countertop/bar top epoxy resin different than epoxy resins used for fiberglassing?

Sengsa Thian2 says:

Thanks

Olya Dzhonson says:

could you please tell me what primer you used?

Danso Elliot says:

Hi leggari , please do you produce this products

Eagle Decoration Services says:

Good result bro

musawer gulzar says:

4:25 even your glass finish got scratched mate !

daod wali says:

The second one he didn’t add enough of the hardening agent that’s it

Dee W. C. says:

Hahaha! He SAID it! “it’s mixed, no its not” yall are funny! It wasn’t mixed right And he used the measuring lines on the side! They were pour in right, they were Not mixed enough on the last on and therefore the Hardener didn’t Harden Correctly. Also he said “just like scratching glass” of course it’s gonna scratch the first one! A screw driver has a sharp edge, not just the flat tip! Hahaha, ya’ll use ur brain and stop being sooo judgemental! THINK BEFORE YOU SPEAK

CutTheSkit says:

So what happens if you use the correct ratio but don’t mix it enough?

What if you put Part A and Part B in one container and hardly mix them? Do they start to solidify at the points where the mixtures meet, but stay soft through the rest of the fluid?

Danso Elliot says:

Wanted to know because I wanted to start this in Ghana. Thank you . please reply me as soon as possible.

cole schmidt says:

These people in the comments are dumbasses. great video. Love the channel.

TheWeirdWorldofGuy says:

Pretty artsy

shawn lO says:

What if your know-it-all because you read the directions or data sheet

Andy Smith says:

Dipshit didn’t help any

Leopold Samsonite says:

“mr know-it-all” that is funny. it sounds like there is a person out there that it may be based on

kellymurphystl says:

The music is distracting and completely unnecessary. Other than that good video.

Mr.009mm Killuminati says:

my buddy does that. why is my pizza burnt. what degree and time did it say too cook for? i dont know, i didnt look at the instructions. its like come on, you’re not an idiot for having to look at instructions.

Assimilate71 says:

Epoxy rules of thumb: If you put too much of one part of the mix, that extra part will remain viscous forever – meaning, you just made goop. When mixing the epoxy: mix until you’re sure it’s been mixed enough, then mix it the same amount again, because you didn’t mix it enough.

Bernard Wölki says:

fortunately, we were all in school and we can calculate percentages 😉

rwhaze says:

May one simply put clear over bad, providing it’s mixed properly?

Mayhem 11x says:

The only thing I noticed was “scrap the side and scrap the bottom” I felt this is not a good example.

Edward Chambers says:

i have worked with acrylics the best way to get a perfect mix is to weigh the epoxy on a scale hardener and resin or by volume

Yolanda Saborio says:

Ok. What is the point of the video if you don’t show how to do it correctly? In the video look like you did the same when you mixed, so I didn’t see any difference in the process of the application.

adyagiler says:

that hat makes him look so cool

Maicon Passos says:

What is the wood to you used for rios video

Samuel Dillon says:

Where can someone buy epoxy resin???? Rona? Home Depot/Hardware? Where?

xag eagle says:

this is what a video sounds like when the volume is not recorded correctly

Kelsey Strouse says:

He stated the 2 errors being made were:
1) not mixing thoroughly
2) not measuring accurately

ArtByBrandyPB says:

If this happens is there a way to correct it? Can a clear coat be added that is mixed correctly?

Write a comment

*

Human Verification: In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Do you like our videos?
Do you want to see more like that?

Please click below to support us on Facebook!

Send this to a friend

▷ Other ReviewsVehicles▷ Show Cars▷ Motorbikes▷ Scooters▷ Bicycles▷ Rims & Tires▷ Luxury BoatsFashion▷ Sunglasses▷ Luxury Watches▷ Luxury Purses▷ Jeans Wear▷ High Heels▷ Kinis Swimwear▷ Perfumes▷ Jewellery▷ Cosmetics▷ Shaving Helpers▷ Fashion HatsFooding▷ Chef Club▷ Fooding Helpers▷ Coktails & LiquorsSports▷ Sport Shoes▷ Fitness & Detox▷ Golf Gear▷ Racquets▷ Hiking & Trek Gear▷ Diving Equipment▷ Ski Gear▷ Snowboards▷ Surf Boards▷ Rollers & SkatesEntertainment▷ DIY Guides▷ Zik Instruments▷ Published Books▷ Music Albums▷ Cine Movies▷ Trading Helpers▷ Make Money▷ Fishing Equipment▷ Paintball Supplies▷ Trading Card Games▷ Telescopes▷ Knives▷ VapesHigh Tech▷ Flat Screens▷ Tech Devices▷ Camera Lenses▷ Audio HiFi▷ Printers▷ USB Devices▷ PC Hardware▷ Network Gear▷ Cloud Servers▷ Software Helpers▷ Programmer Helpers▷ Mobile Apps▷ Hearing AidsHome▷ Home Furniture▷ Home Appliances▷ Tools Workshop▷ Beddings▷ Floor Layings▷ Barbecues▷ Aquarium Gear▷ Safe Boxes▷ Office Supplies▷ Security Locks▷ Cleaning ProductsKids▷ Baby Strollers▷ Child Car Seats▷ Remote ControlledTravel▷ Luggages & Bags▷ Airlines Seats▷ Hotel Rooms▷ Fun Trips▷ Cruise Ships▷ Mexico Tours